# Are PTZ commands available in AngelCam

**URL:** <https://community.angelcam.com/t/are-ptz-commands-available-in-angelcam/131>\
**Category:** Angelcam products & services\
**Created:** [February 8, 2019, 1:48pm UTC](https://community.angelcam.com/t/are-ptz-commands-available-in-angelcam/131 "2019-02-08T13:48:12Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Patrick\_Mignon](https://sea2.discourse-cdn.com/flex016/user_avatar/community.angelcam.com/patrick_mignon/32/36_2.png) [@Patrick\_Mignon](https://community.angelcam.com/u/Patrick_Mignon)\
**Post date:** [February 8, 2019, 1:48pm UTC](https://community.angelcam.com/t/are-ptz-commands-available-in-angelcam/131/1 "2019-02-08T13:48:12Z")

</div>

Hi everyone, newcomer from France.  
My question — for which I didn’t find anything in the forum — regards the possibility of commanding the cam when I’m connected to it, using a Pan Tilt Zoom interface within the site.

Does anyone know if it is possible and has anyone already succeeded in doing this ?

thanks.  
Patrick

---

<div class="post-metadata">

**Author:** ![Justin](https://avatars.discourse-cdn.com/v4/letter/j/3ab097/32.png) [@Justin](https://community.angelcam.com/u/Justin)\
**Post date:** [February 26, 2019, 7:30pm UTC](https://community.angelcam.com/t/are-ptz-commands-available-in-angelcam/131/2 "2019-02-26T19:30:46Z")

</div>

Hi Patrick,

Angelcam does not currently support PTZ control. This is a feature that is on our list for development, though! Please stay tuned for further updates.

---

<div class="post-metadata">

**Author:** ![Eric](https://avatars.discourse-cdn.com/v4/letter/e/898d66/32.png) [@Eric](https://community.angelcam.com/u/Eric)\
**Post date:** [March 13, 2019, 3:55am UTC](https://community.angelcam.com/t/are-ptz-commands-available-in-angelcam/131/3 "2019-03-13T03:55:55Z")

</div>

I would Second the request for PTZ, it would be great to program the ability to set a path and schedule for the PTZ also.

---

<div class="post-metadata">

**Author:** ![Justin](https://avatars.discourse-cdn.com/v4/letter/j/3ab097/32.png) [@Justin](https://community.angelcam.com/u/Justin)\
**Post date:** [August 22, 2019, 8:57pm UTC](https://community.angelcam.com/t/are-ptz-commands-available-in-angelcam/131/4 "2019-08-22T20:57:42Z")

</div>

Hi Eric,

Thank you for your seconding of the request and further feature ideas. I’ll gladly note these down for our development team to consider. 👍

---

<div class="post-metadata">

**Author:** ![Petr\_Ocasek](https://sea2.discourse-cdn.com/flex016/user_avatar/community.angelcam.com/petr_ocasek/32/11_2.png) [@Petr\_Ocasek](https://community.angelcam.com/u/Petr_Ocasek)\
**Post date:** [April 26, 2020, 10:32pm UTC](https://community.angelcam.com/t/are-ptz-commands-available-in-angelcam/131/5 "2020-04-26T22:32:03Z")

</div>

While we understand many of you are requesting this and may get value from this feature, we don’t plan to implement this anytime soon. Why? All our engineering resources are focused to make our Real Time Security product better. Visit [www.angelcam.com/services/real-time-security/](https://www.angelcam.com/services/real-time-security/) for more details.

Thanks for understanding!