# Broadcasting the output from my camera **URL:** \ **Category:** Angelcam products & services\ **Created:** [May 31, 2021, 9:02am UTC](https://community.angelcam.com/t/broadcasting-the-output-from-my-camera/568 "2021-05-31T09:02:34Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![Jim\_Robin](https://sea2.discourse-cdn.com/flex016/user_avatar/community.angelcam.com/jim_robin/32/72_2.png) [@Jim\_Robin](https://community.angelcam.com/u/Jim_Robin)\ **Post date:** [May 31, 2021, 9:02am UTC](https://community.angelcam.com/t/broadcasting-the-output-from-my-camera/568/1 "2021-05-31T09:02:34Z")
I’m not terribly knowledgeable about putting a camera on the web but for months this has been my goal and I’ve invested quite a bit of money and effort trying to make it work. I have now purchased my third camera a Reolink, an Angelbox and what I had understood to be a subscription to Angelcam that would make it all work. My app says that I’m “broadcasting” but I don’t even know what that really means. LOL. To whom am I “broadcasting”? I have searched and searched for the answers and there’s loads of information to sift through but I never really know what and how much of it is relevant to me. If I state exactly what I want to do, can someone take me by the hand and show me what I need to do to achieve my goal? I would like to be able to supply a URL so that a normal http web browser elsewhere on the internet can see what my camera sees. Do I need to find a web host and make my own web page with embedded code in it? Is there another way? I should say that my camera works fine and so does the Angelbox and I can view it here locally on phone apps and web browser. But that is when I’m logged in to Angelcam. I realise that some readers of this will be doing some serious eye-rolling and head-shaking but hey, this is all very new to me and we all had to start somewhere. Thank you very much in advance for any assistance that’s proffered. ---
**Author:** ![Pavel\_Kuba](https://sea2.discourse-cdn.com/flex016/user_avatar/community.angelcam.com/pavel_kuba/32/129_2.png) [@Pavel\_Kuba](https://community.angelcam.com/u/Pavel_Kuba)\ **Post date:** [June 1, 2021, 2:59pm UTC](https://community.angelcam.com/t/broadcasting-the-output-from-my-camera/568/2 "2021-06-01T14:59:18Z")
Hello Jim, first of all thank you for being a [https://www.angelcam.com/](https://www.angelcam.com/) customer! You are more than halfway there as the only part needed now is to create a website where you could embed the code in. > [@Jim\_Robin](#): > > Do I need to find a web host and make my own web page with embedded code in it? Is there another way? Jim, you will need a website. I can recommend you a free website builder like [https://www.weebly.com/](https://www.weebly.com/) or doing a simple [google search](https://www.google.com/search?q=free+website+builder&rlz=1C5CHFA_enCZ936CZ936&oq=free+&aqs=chrome.1.69i57j35i39j0l8.1829j0j4&sourceid=chrome&ie=UTF-8) like this. There are numerous website builders that will help you with the task. After you have a functioning website you will simply visit the sharing tab in the broadcasting application and copy the embed code. You will then follow this [helpful guide](http://help.angelcam.com/en/articles/1160742-working-with-broadcasting-embed-codes) and paste the code in your newly created website. ---
**Author:** ![Jim\_Robin](https://sea2.discourse-cdn.com/flex016/user_avatar/community.angelcam.com/jim_robin/32/72_2.png) [@Jim\_Robin](https://community.angelcam.com/u/Jim_Robin)\ **Post date:** [June 1, 2021, 6:16pm UTC](https://community.angelcam.com/t/broadcasting-the-output-from-my-camera/568/3 "2021-06-01T18:16:10Z")
Thank you very much Pavel? 👍I shall now get cracking with building a web page! 😃 ---
**Author:** ![Petr\_Ocasek](https://sea2.discourse-cdn.com/flex016/user_avatar/community.angelcam.com/petr_ocasek/32/11_2.png) [@Petr\_Ocasek](https://community.angelcam.com/u/Petr_Ocasek)\ **Post date:** [June 3, 2021, 5:05am UTC](https://community.angelcam.com/t/broadcasting-the-output-from-my-camera/568/4 "2021-06-03T05:05:12Z")
Hi Jim, just to clarify - besides having your own website, you can even share the live stream on a page Angelcam is automatically generating for each broadcasted camera. Examples: A) With the Free plan, the page includes ads: [https://hotel-lippert.click2stream.com/](https://hotel-lippert.click2stream.com/) B) With the Standard plan, the page is ads-free: [https://grandislerentals1.click2stream.com/](https://grandislerentals1.click2stream.com/) In both plans, you can name your camera, add a description, tags (all this helps potential viewers to find a camera via search on Google or so), and finally, add your logo to the video. A camera address then can be shared via social networks, email, and so on. If you will decide to create your own website, feel free to use any of these builders: [www.websiteplanet.com/top/10-website-builders](http://www.websiteplanet.com/top/10-website-builders). ---
**Author:** ![Jim\_Robin](https://sea2.discourse-cdn.com/flex016/user_avatar/community.angelcam.com/jim_robin/32/72_2.png) [@Jim\_Robin](https://community.angelcam.com/u/Jim_Robin)\ **Post date:** [June 3, 2021, 6:50am UTC](https://community.angelcam.com/t/broadcasting-the-output-from-my-camera/568/5 "2021-06-03T06:50:04Z")
Thank you Petr. I’ll certainly have a look at that. I know that I have a paid subscription with Angelcam but I don’t know what it entitles me to do. 🤔 ---
**Author:** ![Jim\_Robin](https://sea2.discourse-cdn.com/flex016/user_avatar/community.angelcam.com/jim_robin/32/72_2.png) [@Jim\_Robin](https://community.angelcam.com/u/Jim_Robin)\ **Post date:** [June 3, 2021, 2:42pm UTC](https://community.angelcam.com/t/broadcasting-the-output-from-my-camera/568/6 "2021-06-03T14:42:35Z")
Hi Petr, I tried entering the URL [https://baywatch.click2stream.com/](https://baywatch.click2stream.com/) but it just says that the page cannot be found. Baywatch is the name of my camera. Am I missing a step? Best wishes, Jim Robin ---
**Author:** ![Petr\_Ocasek](https://sea2.discourse-cdn.com/flex016/user_avatar/community.angelcam.com/petr_ocasek/32/11_2.png) [@Petr\_Ocasek](https://community.angelcam.com/u/Petr_Ocasek)\ **Post date:** [June 3, 2021, 3:48pm UTC](https://community.angelcam.com/t/broadcasting-the-output-from-my-camera/568/7 "2021-06-03T15:48:37Z")
The address you have entered to the camera settings is [https://baywatch1.click2stream.com/](https://baywatch1.click2stream.com/) 🙂 ---
**Author:** ![Jim\_Robin](https://sea2.discourse-cdn.com/flex016/user_avatar/community.angelcam.com/jim_robin/32/72_2.png) [@Jim\_Robin](https://community.angelcam.com/u/Jim_Robin)\ **Post date:** [June 3, 2021, 4:18pm UTC](https://community.angelcam.com/t/broadcasting-the-output-from-my-camera/568/8 "2021-06-03T16:18:09Z")
Very grateful ---- Thank you 👍 ---
**Author:** ![Jim\_Robin](https://sea2.discourse-cdn.com/flex016/user_avatar/community.angelcam.com/jim_robin/32/72_2.png) [@Jim\_Robin](https://community.angelcam.com/u/Jim_Robin)\ **Post date:** [June 3, 2021, 4:26pm UTC](https://community.angelcam.com/t/broadcasting-the-output-from-my-camera/568/9 "2021-06-03T16:26:50Z")
Hi Petr, All I’m getting is Ouch! Playback error. And wondering why if I’m paying a subscription, there are ads? Should I cancel my subscription? Best wishes, Jim ---
**Author:** ![Jim\_Robin](https://sea2.discourse-cdn.com/flex016/user_avatar/community.angelcam.com/jim_robin/32/72_2.png) [@Jim\_Robin](https://community.angelcam.com/u/Jim_Robin)\ **Post date:** [June 3, 2021, 5:19pm UTC](https://community.angelcam.com/t/broadcasting-the-output-from-my-camera/568/10 "2021-06-03T17:19:20Z")
Hi Petr, I have to say that this is all very frustrating. “Your AngelBox with ID wHtjvgzxsu went offline. Affected cameras: Baywatch” then a few minutes later … “Your AngelBox with ID wHtjvgzxsu is online again!” Great! It’s back … I’ll just check on the app It’s offline! What causes it to go offline and how do I get it back online? The camera feed is working fine because I checked it on the Reolink app. All is well! Thank you again. Best wishes, Jim ---
**Author:** ![Jim\_Robin](https://sea2.discourse-cdn.com/flex016/user_avatar/community.angelcam.com/jim_robin/32/72_2.png) [@Jim\_Robin](https://community.angelcam.com/u/Jim_Robin)\ **Post date:** [June 3, 2021, 10:15pm UTC](https://community.angelcam.com/t/broadcasting-the-output-from-my-camera/568/11 "2021-06-03T22:15:29Z")
Petr, Further to earlier email where I reported that the “Ouch Playback Error”, amazingly it works on everything (computer web browsers and tablets) EXCEPT my phone! Bizarre! No idea why that is! Best wishes, Jim