# Compatibility tester detects an ip address that has no device on it

**URL:** <https://community.angelcam.com/t/compatibility-tester-detects-an-ip-address-that-has-no-device-on-it/695>\
**Category:** Connecting cameras\
**Created:** [August 25, 2023, 9:09pm UTC](https://community.angelcam.com/t/compatibility-tester-detects-an-ip-address-that-has-no-device-on-it/695 "2023-08-25T21:09:12Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![mitchell\_balsam](https://avatars.discourse-cdn.com/v4/letter/m/e68b1a/32.png) [@mitchell\_balsam](https://community.angelcam.com/u/mitchell_balsam)\
**Post date:** [August 25, 2023, 9:09pm UTC](https://community.angelcam.com/t/compatibility-tester-detects-an-ip-address-that-has-no-device-on-it/695/1 "2023-08-25T21:09:12Z")

</div>

The compatibility tester finds devices that are not cameras. Then it stops looking.

I’m using a Raspberry Pi and in the syslog and I can see what it finds.

I had a boavision camera that I thought was the problem as its not on the compatibility list.

I just purchased a reolink, which is on the compatibility list but its not detected.

Any help would be appreciated.

---

<div class="post-metadata">

**Author:** ![mitchell\_balsam](https://avatars.discourse-cdn.com/v4/letter/m/e68b1a/32.png) [@mitchell\_balsam](https://community.angelcam.com/u/mitchell_balsam)\
**Post date:** [August 26, 2023, 5:22am UTC](https://community.angelcam.com/t/compatibility-tester-detects-an-ip-address-that-has-no-device-on-it/695/2 "2023-08-26T05:22:07Z")

</div>

When I attempt to pair my camera, it finds one camera. But its actually the default gateway that it finds.

The IP it finds is 10.1.1.1:80.