# Pi/arrow not working via SSH? **URL:** \ **Category:** Port-forwarding\ **Created:** [May 11, 2020, 1:10pm UTC](https://community.angelcam.com/t/pi-arrow-not-working-via-ssh/433 "2020-05-11T13:10:32Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![Chad\_Gainor](https://avatars.discourse-cdn.com/v4/letter/c/b9e5f3/32.png) [@Chad\_Gainor](https://community.angelcam.com/u/Chad_Gainor)\ **Post date:** [May 11, 2020, 1:10pm UTC](https://community.angelcam.com/t/pi-arrow-not-working-via-ssh/433/1 "2020-05-11T13:10:32Z")
Just discovered this; exactly what I need, but wasn’t able to get it working for a Hackathon over the weekend. When I SSH to the device and try to login with the pi/arrow account in the doccumentation, it doesn’t accept the password… I’m going to redownload, reflash with Etcher, and try again, but any other ideas? Would really like to get this running asap. ---
**Author:** ![operutka](https://avatars.discourse-cdn.com/v4/letter/o/e47c2d/32.png) [@operutka](https://community.angelcam.com/u/operutka)\ **Post date:** [May 11, 2020, 4:15pm UTC](https://community.angelcam.com/t/pi-arrow-not-working-via-ssh/433/2 "2020-05-11T16:15:16Z")
Hi @Chad_Gainor , if you purchased your AngelBox directly from Angelcam, the SSH is disabled (for security reasons). You can re-enable it yourself. You’ll need to connect a display and a keyboard to your device and enable SSH using raspi-config (see [https://www.raspberrypi.org/documentation/remote-access/ssh/](https://www.raspberrypi.org/documentation/remote-access/ssh/)). Alternatively, you can create a symbolic link on the SD card (you’ll need a Linux machine to do it): ``` ln -s /lib/systemd/system/sshd.service /path/to/the/sd/card/etc/systemd/system/sshd.service ``` If none of this helps, please let me know the type and the version of your device (e.g. Raspberry Pi 3B+) and put here a link to the image that you flashed to your SD card (or describe how exactly you made your AngelBox). I’ll try to re-create the problem. ---
**Author:** ![Chad\_Gainor](https://avatars.discourse-cdn.com/v4/letter/c/b9e5f3/32.png) [@Chad\_Gainor](https://community.angelcam.com/u/Chad_Gainor)\ **Post date:** [May 11, 2020, 4:58pm UTC](https://community.angelcam.com/t/pi-arrow-not-working-via-ssh/433/3 "2020-05-11T16:58:56Z")
Thanks for the reply. I’ve got a Pi 4 2GB, and I followed the guide here [https://github.com/angelcam/arrow-client/wiki/Turning-your-ARM-device-into-AngelBox](https://github.com/angelcam/arrow-client/wiki/Turning-your-ARM-device-into-AngelBox) Used this image - angel-box-rpi-2020-02-11.img.zip ---
**Author:** ![operutka](https://avatars.discourse-cdn.com/v4/letter/o/e47c2d/32.png) [@operutka](https://community.angelcam.com/u/operutka)\ **Post date:** [May 11, 2020, 6:25pm UTC](https://community.angelcam.com/t/pi-arrow-not-working-via-ssh/433/4 "2020-05-11T18:25:34Z")
I’ll check the image tomorrow and let you know. BTW is the SSH service active in your case? Do you see the password prompt when connecting to the device? Something like: ``` pi@hostname's password: ``` If so, try using “raspberry” as the password. It’s possible that we forgot to change the Raspbian’s default password after switching to the latest version of Raspbian. ---
**Author:** ![operutka](https://avatars.discourse-cdn.com/v4/letter/o/e47c2d/32.png) [@operutka](https://community.angelcam.com/u/operutka)\ **Post date:** [May 12, 2020, 9:05am UTC](https://community.angelcam.com/t/pi-arrow-not-working-via-ssh/433/5 "2020-05-12T09:05:49Z")
Hello again @Chad_Gainor, I’ve tested it today. I flashed the same image that you mentioned (i.e. angel-box-rpi-2020-02-11.img.zip) using etcher. The SSH was working out of the box and I was able to log in into the device using pi/arrow without any problems. The only potential issue that comes to my mind is a problem with your SSH client. Theoretically, it may be messing with your password for some reason but, frankly, I’ve never heard of an issue like that.